Appendix C: Installing the Adaptec HostRAID Utility and the Windows OS Adding/Deleting Hotspares Note : In order to rebuild a RAID (RAID 0 or RAID 1), you will need to add a new HDD as a hotspare. 1. Turn on your computer and press as prompted to access the Adaptec RAID Confi guration Utility. 2. From the ARC menu, select Array Confi guration Utility. 3. From the Array Confi guration Utility menu, select Add/Delete Hotspares and press . The following screen appears: To Add a HotSpare Drive 4. Use the arrow keys to highlight and select the disk you want to designate as a Hotspare, and press and . 5. Press yes when the following prompt displays :
"Do you want to create spare?" (Yes/No?) The spare drive you have selected will appear in the Select Drive Menu. To Delete a HotSpare Drive 4. From the List of "Assigned HotSpare Drives" (in the right window), select the hotspare drive you want to delete. Then, press and . 5. When the following prompt displays: "Do you want to Delete the Hotspare?" (Yes/No?) Press to delete the selected hotspare. The hotspare drive you have selected will be deleted. C-9