Appendix C: Installing the Adaptec HostRAID Utility and the Windows OS Rebuilding Arrays Note 1: You can use Rebuilding on Fault Tolerant array (RAID 1) only. If an array Build or Initialization process is interrupted or critical with one member missing, you must perform a Rebuild to get the array to the Optimal status. For a critical array Rebuild operation, the optimal drive is the source drive. Note 2: If no spare array exists and a hard disk drive fails, you need to create a spare before you can rebuild an array. To Rebuild an array: 1 From the Main Menu, select Manage Arrays (as shown in the screen below). From the List of Arrays, select the array you want to Rebuild.
2 Press for Array Rebuild. C-13