Supermicro X7DA3+ — Supermicro X7DA3+ Motherboard User & Service Manual PDF

X7DA3+ User's Manual Creating a RAID 10 (RAID 1+ RAID 0): 1. Select "Create RAID Volume" from the main menu and press the key. The following screen will appear: 2. Specify a name for the RAID 10 set and press . 3. When RAID Level item is highlighted, use the , keys to select RAID 10 (RAID1 + RAID0) and hit . 4. When the Stripe Size is highlighted, use the , keys to select the stripe size from 4 KB to 128 KB for your RAID 10 and hit . The default setting is 64 KB. ( Note : For a server, please use a lower stripe size, and for a multimedia system, use a higher stripe size.) 5. When the RAID Volume Capacity item is highlighted, enter your RAID volume capacity and hit .

The default setting is the maximum capacity allowed. 6. Press when the Create Volume item is highlighted. A warning message displays. 7. When asked "Are you sure you want to create this volume (Y/N), press "Y" to create the RAID volume, or type "N" to go back to the Create Volume menu. D-6