Chapter 2: Installation HDD LED The HDD LED connection is located on pins 13 and 14 of JF1. Attach the hard drive LED cable here to display disk activity (for any hard drives on the system, including SAS, Serial ATA and IDE). See the table on the right for pin defi nitions. NIC1/NIC2 LED Indicators The NIC (Network Interface Control- ler) LED connection for GLAN port1 is located on pins 11 and 12 of JF1 and the LED connection for GLAN Port2 is on Pins 9 and 10. Attach the NIC LED cables to display network activity. Refer to the table on the right for pin defi nitions. A. HDD LED B. NIC1 LED C.
NIC2 LED 19 20 Ground NMI 1 N A L J X X Power LED Vcc S UPER X7DA3+ ® A B NIC1 LED HDD LED Vcc Vcc C NIC2 LED Vcc OH/Fan Fail LED Vcc PWR Fail LED Vcc Ground Reset Reset Button Ground PWR Power Button 2 1 2-11 HDD LED Pin Defi nitions (JF1) Pin# Defi nition 13 +5V 14 HD Active GLAN1/2 LED Pin Defi nitions (JF1) Pin# Defi nition 9/11 Vcc 10/12 Ground