Chapter 2: Installation Reset Button The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to the hardware reset switch on the computer case. Refer to the table on the right for pin defi nitions. Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be con- fi gured to function as a suspend button (with a setting in BIOS - See Chapter 4.) To turn off the power when set to suspend mode, press the button for at least 4 seconds. Refer to the table on the right for pin defi nitions. A. Reset Button B.
PWR Button Ground NMI 19 20 X X 1 N A L J Power LED Vcc S UPER X7DA3+ ® HDD LED Vcc NIC1 LED Vcc NIC2 LED Vcc OH/Fan Fail LED Vcc PWR Fail LED Vcc Ground Reset Reset Button A Ground 2 1 PWR Power Button B 2-13 Reset Button Pin Defi nitions (JF1) Pin# Defi nition 3 Reset 4 Ground Power Button Pin Defi nitions (JF1) Pin# Defi nition 1 Signal 2 +3V Standby