Supermicro X7DA3+ — Supermicro X7DA3+ Motherboard User & Service Manual PDF

Chapter 4: BIOS LBA Mode Control This item determines whether the Phoenix BIOS will access the IDE Channel 0 Master Device via the LBA mode. The options are Enabled and Disabled. 32 Bit I/O This option allows the user to enable or disable the function of 32-bit data transfer. The options are Enabled and Disabled . Transfer Mode This option allows the user to set the transfer mode. The options are Standard , Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2 . Ultra DMA Mode This option allows the user to select Ultra DMA Mode. The options are Disabled , Mode 0, Mode 1, Mode 2 , Mode 3, Mode 4, and Mode 5.

Parallel ATA This setting allows the user to enable or disable the function of Parallel ATA. The options are Disabled and Enabled . Serial ATA This setting allows the user to enable or disable the function of Serial ATA. The options are Disabled and Enabled. Native Mode Operation This feature allows you to select Serial ATA for SATA or Auto (Native Mode) for ATA. The options are: Serial ATA and Auto . SATA Controller Mode Select Compatible to allow the SATA and PATA drives to be automatically-detected and be placed in the Legacy Mode by the BIOS. Select Enhanced to allow the SATA and PATA drives to be to be automatically-detected and be placed in the Native IDE Mode. ( Note:

The Enhanced mode is supported by the Windows 2000 OS or a later version.) Serial ATA (SATA) RAID Enable (Available when SATA Controller is enabled.) Select Enable to enable Serial ATA RAID Functions. (For the Windows OS environment, use the RAID driver if this feature is set to Enabled. When this item is set to Enabled, the item: "ICH RAID Code Base" will be available for you to select either Intel or Adaptec Host RAID fi rmware to be activated. If this item is set to Disabled , the item-SATA AHCI Enable will be available.) The options are Enabled and Disabled . 4-5