Chapter 4: BIOS Mode This feature allows you to specify the parallel port mode. The options are Output only, Bi-Directional, EPP and ECP . DMA Channel This item allows you to specify the DMA channel for the parallel port. The options are DMA1 and DMA3 . Floppy Disk Controller This setting allows you to assign control of the fl oppy disk controller. The options are Enabled (user defi ned), Disabled, and Auto (BIOS and OS controlled). Base I/O Address This setting allows you to select the base I/O address for the parallel port. The options are Primary and Secondary. DMI Event Logging Access the submenu to make changes to the following settings.
Event Log Validity This is a display to inform you of the event log validity. It is not a setting. Event Log Capacity This is a display to inform you of the event log capacity. It is not a setting. View DMI Event Log Highlight this item and press to view the contents of the event log. Event Logging This setting allows you to Enable or Disable event logging. ECC Event Logging This setting allows you to Enable or Disable ECC event logging. Mark DMI Events as Read Highlight this item and press to mark the DMI events as read. Clear All DMI Event Logs Select Yes and press to clear all DMI event logs. The options are Yes and No . 4-17