Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the A+ Server 1012A-MTF. In stallation and maintenance should be performed by experienced technicians only. The A+ Server 1012A-MTF is a high-end server based on the CSE-813MT-350CB 1U rackmount chassis and the MB-H8SML-iF single processor serverboard. Manual Organization Chapter 1: Introduction The first chapter provides a checklist of the main components included with the server system and describes the main features of the MB-H8SML-iF serverboard and the CSE-813MT-350CB chassis. Chapter 2:
Server Installation This chapter describes the steps necessary to install the A+ Server 1012A-MTF into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3: System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. iii