Supermicro A+ Server 1012A-MTF — Supermicro A+ Server 1012A-MTF — User's Manual

Chapter 5: Advanced Motherboard Setup Figure 5-6. Adaptec RAID Utility Program Screen Using the Adaptec RAID Utility The Adaptec® RAID Utility program is where you can define the drives you want to include in the RAID array and the mode and type of RAID. You may also use the procedure below to install the RAID driver during the Win­ dow's OS installation: Installing the RAID Driver During OS Installation 1. With the Windows OS installation CD in the CD-ROM drive, restart the sys­ tem. 2. When you see the prompt, hit the key to enter Windows setup. 3. Eventually a blue screen will appear with a message that begins "Windows could not determine the type of one or more storage devices . .

." When you see the screen, hit the key to "Specify Additional Device", then insert the driver diskette you just created into the floppy drive. 5-25