A+ Server 1012A-MTF USER'S MANUAL PCIE x8 Slot7 These settings Enable or Disable the specified PCIE slot in your system. Onboard LAN Option ROM Select This setting allows you to select the onboard LAN option ROM for iSCSI or PXE . Note : You must enable ONLY LAN1 when the iSCSI support option is specified. Load Onboard LAN 1 Option ROM This option allows you to Enable or Disable the onboard LAN 1 option ROM. Load Onboard LAN 2 Option ROM This option allows you to Enable or Disable the onboard LAN 2 option ROM. SAS Onboard SAS Option ROM This option allows you to Enable or Disable the onboard SAS option ROM.
Boots Graphic Adapter Priority This option specifies the graphic adapter priority for Onboard VGA or Offboard VGA. SuperIO Device Configuration Serial 1 Address This option specifies the base I/O port address and Interrupt Request address of serial port 1. Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to Disabled , the serial port physically becomes unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address.
Options include Disabled, 3F8/IRQ4 , 3E8/IRQ4 and 2E8/IRQ3 Serial 2 Address This option specifies the base I/O port address and Interrupt Request address of serial port 2. Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to "Disabled", the serial port physically becomes unavailable. Select "2F8/IRQ3" to allow the serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt address. Options include Disabled, 2F8/IRQ3 , 3E8/IRQ4 and 2F8/IRQ3. Serial Port 2 Attribute This option allows you to set COM2 as a normal serial port or as virtual COM for SOL. Options are SOL or COM. 7-10