Supermicro SuperServer E200-8B — Supermicro SuperServer E200-8B — User's Manual

Chapter 5: BIOS The options for Serial Port 4 are Auto , (IO=2E0h; IRQ=4), (IO=3F0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=3E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), and (IO=3D0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12). Hardware Health Configuration PC Health Status Fan Speed Control Mode This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase for effective system cooling. Select "Full Speed" to allow the onboard fans to run at full speed (of 100% Pulse Width Modulation Duty Cycle) for maximum cooling.

This setting is recommended for special system configuration or debugging. Select "Standard" for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the needs between system cooling and power saving. This setting is recommended for regular systems with normal hardware configurations. The options are Full Speed (@100% of PWM Cycle), Standard (@50% of PWM Cycle), Heavy I/O, and PUE (Power Usage Efficiency). The following items will be displayed: Peripheral Temperature Fan 1 Speed Fan 2 Speed 3VCC AVCC VSB3v VBAT Serial Port Console Redirection COM0 Use this feature to enable console redirection for the COM0 port. The options are Enabled and Disabled. 5-11