Supermicro · X11QPH+ · 219 pp.
Supermicro X11QPH+ Motherboard User's Manual (Revision 1.1c) PDF
Related manuals
Document text
The information in this user’s manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com . Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.
This product, including software and documentation, is the property of Supermicro and/ or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPER MICRO COMPUTER, INC., BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement:
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in industrial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. !
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products for use in such ultra-hazardous applications, it does so entirely at its own risk.
Furthermore, buyer agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale. Manual Revision 1.1c Release Date: September 28, 2020 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2020 by Super Micro Computer, Inc. All rights reserved.
Printed in the United States of America
Preface Preface About This Manual This manual is written for system integrators, IT technicians and knowledgeable end users. It provides information for the installation and use of the X11QPH+ motherboard. About This Motherboard The X11QPH+ motherboard supports four Intel Xeon Scalable-SP (81xx/61xx/51xx series) and 2nd Generation Intel Xeon Scalable-SP (82xx/62xx/52xx series) processors (Socket P0) with the TDP (Thermal Design Power) of up to 205W, and three UPI (UltraPath Interconnect) links of up to 10.4 GT/s (Note 1 below).
With the Intel C621 PCH built-in, this motherboard supports up to 16 PCI-E 3.0 slots (in 4U chassis) or up to 11 PCI-E 3.0 slots (in 2U chassis) using WIO/UIO/other riser cards, 14 SATA 3.0 connections, and 12 TB (max) DDR4 3DS LRDIMM/LRDIMM/3DS RDIMM/RDIMM ECC memory of up to 2933 MHz in 48 DIMM slots (Note 2). It also supports up to 18 TB memory with DCPMM modules. The X11QPH+ offers maximum performance, system cooling, and IO expendability currently available on the market. This motherboard is optimized for virtualization, datacenter, and financial applications, and is ideal for use in 4-way systems with 24x SAS and 4x hybrid NMVe support.
This motherboard is intended to be installed and serviced by professional technicians only. For processor/memory updates, please refer to our website at http://www. supermicro.com/products/. Notes 1. UPI/memory speeds are dependent on the processors installed in your system. 2. 2933 MHz memory is supported by the 2nd Gen Intel Xeon Scablable-SP (82xx/62xx series) processors. 3. DCPMM memory is supported by the 2nd Gen Intel Xeon Scablable-SP (82xx/62xx/52xx series) processors. Chapter 1 describes the features, specifications and performance of the motherboard, and provides detailed information on the Intel C621 PCH chip. Chapter 2 provides hardware installation instructions.
Read this chapter when installing the processor, memory modules and other hardware components into the system. Chapter 3 describes troubleshooting procedures for video, memory, and system setup stored in the CMOS. Chapter 4 includes an introduction to the BIOS, and provides detailed information on running the CMOS Setup utility. Appendix A provides BIOS Error Beep Codes. Appendix B lists software program installation instructions . Appendix C provides standardized warning statements. Appendix D contains UEFI BIOS Recovery instructions. 3
Super X11QPH+ User's Manual Appendix E provides information on how to configure VROC RAID settings. Appendix F provides information on how to configure secure boot settings. Appendix G provides information on how to configure iSCSI settings. Appendix H provides information on how to configure Network Interface Card (NIC) settings. Conventions Used in the Manual Special attention should be given to the following symbols for proper installation and for safety precautions. Warning! Indicates important information given to prevent equipment/property damage or per sonal injury. Important: Important information given to ensure proper system installation or to relay safety precautions. Note:
Additional Information given to differentiate various models or provides infor mation for proper system setup. 4
Contacting Supermicro Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (General Information) support@supermicro.nl (Technical Support) rma@supermicro.nl (Customer Support) Website: www.supermicro.nl Asia-Pacific Address: Super Micro Computer, Inc. 3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235 Taiwan (R.O.C) Tel: +886-(2) 8226-3990 Fax: +886-(2) 8226-3992 Email: support@supermicro.com.tw Website: www.supermicro.com.tw 5