S UPER S ERVER 1015B-M3 User's Manual 1-2 Motherboard Features The X7SB3 is a single processor motherboard based upon Intel's E3210 chipset. Below are the main features of the X7SB3. Processor The X7SB3 supports single Intel® Xeon® 3000 Series/Core 2 LGA775 processors at system bus speeds of 1333, 1066 and 800 MHz. Please refer to the motherboard specifi cations pages on our web site for updates on supported processors. Memory The X7SB3 has four 240-pin DIMM slots that can support up to 8 GB of unbuffered ECC/non-ECC DDR2-800/667 SDRAM. Onboard SAS An onboard LSI 1068E SAS controller in integrated into the X7SB3.
The hot-swap SAS drives are connected to a backplane that provides power, bus termination and confi guration settings. Note: The operating system you use must have RAID support to enable the hot-swap capability and RAID function of the SAS drives. RAID 0, 1, 5 and 10 are supported. Refer to the following ftp site for setup guidelines . Onboard SATA A SATA controller is built in to the ICH9 portion of the chipset to provide support for a six port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable units. PCI Expansion Slots The X7SB3 has one PCI-Express x8 slot and one PCI 33 MHz slot.
The PCI-E slot may be populated with a riser card (included). 1-2