Chapter 5: Advanced Serverboard Setup 5-12 Floppy, SATA and SAS Ports Floppy Drive Connector The fl oppy connector is located near the USB2 port and the I-Button. See the table at right for pin defi nitions. SATA Ports There are no jumpers to con- fi gure the onboard SATA ports. See the table on the right for pin defi nitions. SAS Ports There are eight SAS ports included on the motherboard. See the table on the right for pin defi nitions. Note: JPS1 must be set cor- rectly to enable the SAS con- troller.
5-23 Floppy Drive Connector Pin Defi nitions (Floppy) Pin# Defi nition Pin # Defi nition 1 Ground 2 FDHDIN 3 Ground 4 Reserved 5 Key 6 FDEDIN 7 Ground 8 Index 9 Ground 10 Motor Enable 11 Ground 12 Drive Select B 13 Ground 14 Drive Select B 15 Ground 16 Motor Enable 17 Ground 18 DIR 19 Ground 20 STEP 21 Ground 22 Write Data 23 Ground 24 Write Gate 25 Ground 26 Track 00 27 Ground 28 Write Protect 29 Ground 30 Read Data 31 Ground 32 Side 1 Select 33 Ground 34 Diskette SATA Ports Pin Defi nitions (I-SATA0, I-SATA1) Pin# Defi nition Pin # Defi nition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground SAS Ports Pin Defi nitions (SAS0 ~ SAS7) Pin# Defi nition Pin # Defi nition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground