Supermicro SuperServer 1015B-M3 — Supermicro SuperServer 1015B-M3 User's Manual PDF (Revision 1.0)

Chapter 6: Advanced Chassis Setup Insert the new drive unit in the slot until the tab locks in place. 5. Reconnect the data and power cables. 6. Replace the chassis cover (replace the server in the rack, if necessary) and 7. power up the system. Figure 6-5. Installing the DVD-ROM Drive Drive Screw Drive Screws Mini Bezel Lock Screw 6-5 Power Supply The SuperServer 1015B-3 has a single 560 watt power supply, which is auto- switching capable. Power must be removed from the system when replacing the power supply. Power Supply Failure If the power supply module fails, the system will shut down and you will need to replace the module.

Replacements can be ordered directly from Supermicro (see contact information in the Preface). As there is only one power supply module in the system, power must be com- pletely removed from the server before removing and replacing the power supply for whatever reason. 6-7