S UPER S ERVER 1015B-M3 User's Manual Serial ATA This setting allows the user to enable or disable Serial ATA connections. The options are Disabled and Enabled. Native Mode Operation Select Serial ATA for SATA or select Auto (Native Mode) for ATA. The options are: Serial ATA and Auto . SATA AHCI Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take caution when using this function. This feature is for advanced programmers only. The Enhanced AHCI mode is available when the Windows XP-SP1 OS and the IAA Driver is used.) The options are Enabled and Disabled . X SATA Port0 and SATA Port1 These settings allow the user to set the parameters of the drive indicated above.
Hit to activate the following sub-menu screen for detailed options of the items. Set the correct confi gurations accordingly. The items included in the sub- menu are: Type This feature allows the user to select the type of a drive specifi ed. Select Auto to allow the BIOS to automatically set the capacity of the drive specifi ed. Select User to allow the user to enter the parameters of the drive installed at this con- nection. Select CDROM if a CDROM drive is installed. Select ATAPI if a remov- able disk drive is installed. CHS Format The following items will be displayed by the BIOS: Cylinders: This item indicates the status of Cylinders. Headers: This item indicates the number of headers.
Sectors: This item displays the number of sectors. Maximum Capacity: This item displays the maximum storage capacity of the system. LBA Format The following items will be displayed by the BIOS: Total Sectors: This item displays the number of total sectors available in the LBA Format. Maximum Capacity: This item displays the maximum capacity in the LBA Format. 7-4