Chapter 7: BIOS power off when the user presses the key for 4 seconds and longer. The options are Instant-off and 4-seconds. Resume On Modem Ring Select On to “wake your system up” when an incoming call is received by your modem. The options are On and Off . Resume On PME# Select On to “wake your system up” from the PME#. The options are On and Off. PS2 Keyboard (KB)/Mouse Wake Up Select Enable to “wake your system up” from the S3, S4 or S5 state. If this feature is set enabled, you will also need to enable the JPWAKE jumper by closing pins 1-2. (Please refer to Page 1-5 and Chapter 2 for more details). The default setting is Disabled .
USB Wake Up Select Enable to “wake your system up” via a USB device. If this feature is set enabled, you will also need to enable the JPUSB1 jumper by closing pins 1-2. (Please refer to Page 1-4 and Chapter 2 for more details). The default setting is Disabled . Power Loss Control This setting allows you to choose how the system will react when power returns after an unexpected power loss. The options are Stay Off, Power On, and Last State . Watch Dog If enabled, this option will automatically reset the system if it is not active for more than 5 minutes. The options are Enabled and Disabled .
Extended Shadow RAM Select Enabled to enable Extended Shadow RAM and allow the contents stored in ROM to be directly copied into extended memory for faster operation. Take caution when using this feature. If the system hangs, reset the setting for this item and reboot the system. The options are Enabled and Disabled . Summary Screen This setting allows you to Enable or Disable the summary screen which displays the system confi guration during bootup. 7-7