S UPER S ERVER 1018D-73MTF Manual Installing the Outer Rails to the Rack (Figures 2-3 and 2-4) Outer Rails 1. Attach the short bracket to the outside of the long bracket. You must align the pins with the slides. Also, both bracket ends must face the same direction. 2. Adjust both the short and long brackets to the proper distance so that the rail fits snugly into the rack. 3. Secure the long bracket to the front side of the outer rail with two M5 screws and the short bracket to the rear side of the outer rail with three M5 screws. 4. Repeat steps 1-4 for the left outer rail. Figure 2-3.
Assembling the Outer Rails Secure to the Front of the Rack Secure to the Rear of the Rack Attach Outer Rails Together Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip over. 2-6