Supermicro 1018D-73MTF — SUPERSERVER 1018D-73MTF — User's Manual

Chapter 3: System Interface Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel to keep you constantly informed of the overall status of the system as well as the three buttons described below. 3-2 Control Panel Buttons There are three buttons located on the front of the chassis: a UIB button, a reset button and a power on/off button. UID Depressing the UID (unit identifier) button illuminates an LED on both the front and rear of the chassis for easy system location in large stack configurations. The LED will remain on until the button is pushed a second time. Another UID button on the rear of the chassis serves the same function.

This button has an LED built into it, which will illuminate when either the front or rear UID button is pushed. Reset Use the reset button to reboot the system. Power This is the main power button, which is used to apply or turn off the main system power. Turning off system power with this button removes the main power but keeps standby power supplied to the system. 3-1