S UPER S ERVER 1018D-73MTF User's Manual Onboard Power LED (JLED1) An onboard Power LED header is lo cated at JLED1. This Power LED header connects to JF1 to indicate the status of system power. See the table on the right for pin definitions. Internal Buzzer (SP1) The Internal Buzzer (SPKR1) can be used to provide audible indications for various beep codes. See the table on the right for pin definitions. 5-18 Onboard PWR LED Pin Definitions Pin# Definition 1 Vcc 2 No Connection 3 Connection to PWR LED in JF1 Internal Buzzer Pin Definition Pin# Definitions Pin 1 Pos. (+) Beep In Pin 2 Neg. (-) Alarm Speaker