Chapter 5: Advanced Motherboard Setup 5. Apply the proper amount of thermal grease on the CPU. Note : If your heatsink came with a thermal pad, ignore this step. Thermal Grease 6. Make sure the wires are not pinched between the heatsink and the CPU. Also make sure to keep clearance between the fan wires and the fins of the heatsink. 7. Align the four heatsink fasteners with the mounting holes on the motherboard. Gently push the pairs of diagonal fasteners (#1 & #2, #3 and #4) into the mounting holes until you hear a click. Also, make sure to orient each fastener so that the narrow end of the groove is pointing outward. Figure 5-1. Active CPU Heatsink 8.
Once all four fasteners are securely inserted into the mounting holes, and the heatsink is properly installed on the motherboard, connect the heatsink fan wires to the CPU fan connector. 5-5