Supermicro SuperServer 1018L-MP — Supermicro SuperServer 1018L-MP User's Manual PDF Download

Chapter 5: Advanced Motherboard Setup 5-11 Ports, LEDs, and Connectors Connector Description Audio FP Front Panel Audio Header AUDIO Ports Audio Connectors on the I/O backpanel. Battery Onboard Battery COM1/COM2 COM1 and COM2 Ports (on the I/O backpanel*) COM3-COM5 COM3/COM4/COM5 Port Headers Fan1-Fan3 System/CPU Fan Headers (Fan1: CPU Fan) HDMI/DP DisplayPort (on the I/O backpanel) JD1 Speaker/buzzer (Pins 3-4: Buzzer, Pins 1-4:

External Speaker) JF1 Front Panel Control Header JL1 Chassis Intrusion Header JPW1 24-pin ATX Power Connector JPW2 12V 4-pin CPU power Connector (Required and alternative single power source.) JSD1 SATA DOM (Device On Module) Power Connector _ _ JTPM1 Trusted Platform Module (TPM) Header LAN1/LAN2 Gigabit (RJ45) Ports LAN1 and LAN2 (on the I/O backpanel) SP1 Internal Speaker/Buzzer I-SATA0-3 (Intel-)Serial ATA (SATA 3.0) Ports 0-1 (6Gb/sec), Ports 2-3 (3Gb/s) mini PCIE Mini PCIE Slot with mSATA support Slot 1 PCI-Express 2.0 x16 Slot JGPIO 1 General Purpose I/O Expander Header USB 0/1, 2/3 Backpanel USB 3.0 Ports 0/1 and USB 2.0 Ports 2/3 USB 4/5 Front Panel USB Header for USB 2.0 Ports 4/5 USB 10 Internal Type A USB 2.0 Port 10 DVI-I DVI (Combined Digital and Analog Video Interface) Port JSMB1 System Management Bus (SMB) Header LED1 Onboard Standby Power LED (Solid Green:

Power On) Jumper Descriptions Jumper Name Setting JBR1 BIOS Recovery Pins 1-2 (Normal) JBT1 CMOS Clear Short contact pads to reset CMOS JI2C1/JI2C2 SMB to PCIe Slots Off (Disabled) JPAC1 Audio Enable Pins 1-2 (Enabled) JPME2 Intel ME Manufacturing Mode Select Pins 1-2 (Normal) JWD1 Watch Dog Enable Pins 1-2 (Reset) JPUSB1 USB Wake-Up Enable/Disable Pins 2-3 (Disabled)