Supermicro SuperServer 1018L-MP — Supermicro SuperServer 1018L-MP User's Manual PDF Download

Chapter 6: Advanced Chassis Setup Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install or replace components in the chassis. The only tool required is a Phillips screwdriver. Review the warnings and precautions listed in the manual before setting up or servicing this chassis. These include information in Chapter 2 and the warning/ precautions listed in the setup instructions 6-1 Removing the Power Cord Before performing most setup or maintenance tasks, use the following procedure to ensure that power has been disconnected from the system. 1. Use the operating system to power down the system, following the on-screen prompts. 2.

After the system has completely shut down, remove the power adapter cord from the back of the chassis. 3. Disconnect the cord from the power strip or wall outlet. 6-1