Supermicro SuperServer 1018L-MP — Supermicro SuperServer 1018L-MP User's Manual PDF Download

Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The SuperServer 1018L-MP is a compact, embedded system comprised of the SC101i chassis and the X10SLV single processor motherboard. Refer to our web site for information on operating systems that have been certified for use with the system (www.supermicro.com). For your system to work properly, please follow the links below to download all necessary drivers and utilities, and the user’s manual for your server. Supermicro product manuals: http://www.supermicro.com/support/manuals/ Product drivers and utilities: ftp://ftp.supermicro.com Product safety info:

http://super-dev/about/policies/safety_information.cfm If you have any questions, please contact our support team at: support@supermicro.com. This manual may be periodically updated without notice. Please check the Supermicro Web site for possible updates to the manual revision level. 1-2 Motherboard Features The server is built around the X10SLV, a single processor motherboard based on the Intel H81 chipset. Below are the main features. Figure 1-1 is a block diagram of the chipset. Processors The X10SLV supports a single 4th Generation Intel Core i7, i5, i3, Pentium/Celeron processor. Refer to the web site for a complete listing of supported processors (www.supermicro.com).

Memory The board has two DIMM slots that can support up to 16GB of Non-ECC DDR3 SODIMM up to 1600MHz memory. See Chapter 5 for details. 1-1