Supermicro SuperServer 1018L-MP — Supermicro SuperServer 1018L-MP User's Manual PDF Download

SUPERSERVER 1018L-MP User's Manual Normally, the only visible Power-On Self-Test (POST) routine is the memory test. As the memory is being tested, press the key to enter the main menu of the AMI BIOS Setup Utility. From the main menu, you can access the other setup screens. An AMI BIOS identification string is displayed at the left bottom corner of the screen, below the copyright message. How to Start the Setup Utility Caution: Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.

In no event shall Supermicro be liable for direct, indirect, special, incidental, or consequential damages arising from a BIOS update. If you have to update the BIOS, do not shut down or reset the system while the BIOS is updating. This is to avoid possible boot failure. 7-2 Main Setup When you first enter the AMI BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS Setup screen is shown below. 7-2 Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Set the Date. Use tab to switch between Data elements.

System Date [Wed 08/16/2013] System Time [16:49:50] Supermicro X10SLV Version 1.00 Build Date 07/14/2013 Memory Information Total Memory 4096 MB (DDR3)  : Select Screen  : Select Item Enter: Select +/- : Change Opt. F1 : General Help F2 : Previous Values F3 : Optimized Defaults F4 : Save & Exit ESC : Exit Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Main System Date [Wed 08/16/2013] System Time [16:49:50] Supermicro X10SLV Version 1.00 Build Date 07/14/2013 Memory Information Total Memory 4096 MB (DDR3) Set the Date. Use tab to switch between Data elements.  :

Select Screen  : Select Item Enter: Select +/- : Change Opt. F1 : General Help F2 : Previous Values F3 : Optimized Defaults F4 : Save & Exit ESC : Exit Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.