Chapter 7: BIOS Max TOLUD (Top of Low Usable DRAM) This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable DRAM" memory space to be used by internal graphics devices, GTT Stolen Memory, and TSEG, respectively, if these devices are enabled. The options are Dynamic , 1 GB, 1.25 GB, 1.5 GB, 1.75 GB, 2 GB, 2.25 GB, 2.5 GB, 2.75 GB, 3 GB and 3.25 GB. Note: TSEG is a block of memory that is only accessible by the processor while operating in System Management Mode (SMM). Memory Scrambler This feature enables or disables memory scrambler support for memory error correction. The settings are Enabled and Disabled.
PCH-IO Configuration This item displays the information for the PCH-IO Chip. Intel PCH Rev ID USB Configuration USB Devices: 1 Keyboard, 1 Mouse, 2 Hubs EHCI1 Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 1 for USB 2.0 support. One EHCI controller must always be enabled. The settings are Enabled and Disabled. EHCI2 Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 2 for USB 2.0 support. One EHCI controller must always be enabled. The settings are Enabled and Disabled. Legacy USB Support Select Enabled to support legacy USB devices. Select Auto to disable legacy support when legacy USB devices are not present.
If Disable is selected, legacy USB devices will not be supported. The options are Enabled, Disabled and Auto. Port 60/64 Emulation This feature enables or disables I/O port 60h/64h emulation support. This should be enabled for complete USB keyboard legacy support for non-USB-aware operating systems. The options are Disabled and Enabled . 7-15