Supermicro SuperServer 1018L-MP — Supermicro SuperServer 1018L-MP User's Manual PDF Download

Chapter 7: BIOS Serial ATA Port 0~ Port 3 This item displays the information detected on the installed SATA drives on the particular SATA port. Model number of drive and capacity Software Preserve Support Port 0 ~ Port 3 Hot Plug This feature designates the port specified for hot plugging. Set this item to Enabled for hot-plugging support, which will allow the user to replace a SATA disk drive without shutting down the system. The options are Enabled and Disabled. Port 0 ~ Port 1 SATA Device Type This feature configures the selected SATA port to support either a solid state drive or hard disk drive. The options are Hard Disk Drive and Solid Sate Drive.

Port 0 ~ Port 3 Spin Up Device On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRESET initialization sequence to the device. The options are Enabled and Disabled . If the item above - SATA Mode Selectiion is set to IDE, the following items are displayed: Serial ATA Port 0~ Port 3 This item displays the information detected on the installed SATA drives on the particular SATA port. Model number of drive and capacity Software Preserve Support If the item above - SATA Mode Select is set to RAID, the following items are displayed (this is supported on the X10SLV-Q only) :

Serial ATA Port 0~ Port 3 This item displays the information detected on the installed SATA drives on the particular SATA port. Model number of drive and capacity Software Preserve Support 7-17