Chapter 7: BIOS Other PCI Device ROM Priority This feature selects a PCI device Option ROM for system boot if this device is not a network, mass storage, or video device. The options are UEFI Only and Legacy Only . Onboard LAN1/Onboard LAN2 This setting enables or disables the designated onboard LAN port. The options are Disabled and Enabled . Onboard LAN1 Option ROM/Onboard LAN2 Option ROM Select PXE (Preboot Execution Environment) to boot the computer using a PXE device installed in a LAN port specified. Select Disabled to prevent system boot using a device installed in a LAN port.
The options for Onboard LAN1 Option ROM are Disabled, and PXE .The options for Onboard LAN2 Option ROM are Disabled and PXE. Network Stack Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware Interface) for network stack support. The options are Enabled and Disabled . Ipv4 PXE Support (Available when Network Stack is set to Enabled) Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot support. If this feature is set to Disabled, Ipv4 PXE boot option will not be supported. The options are Enabled and Disabled.
Ipv6 PXE Support (Available when Network Stack is set to Enabled) Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for boot support. If this feature is set to Disabled, Ipv6 PXE boot option will not be supported. The options are Enabled and Disabled. ACPI Settings High Precision Timer Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing multimedia streams, providing smooth playback and reducing the dependency on other timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the CPU.
The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer. The options are Enabled and Disabled. 7-19