Chapter 7: BIOS PCH-FW Configuration The following information are displayed: ME FW Version ME Firmware Mode ME Firmware Type ME Firmware SKU PTT Capability/State Firmware Update Configuration ME FW Image Re-Flash Select Enabled to re-flash the ME (Management Engine) Firmware. The options are Disabled and Enabled. NCT6106D Super IO Configuration NCT6106D Super IO Chip Serial Port 1~5 Configuration Select Enabled to enable onboard serial ports. The options are Enabled and Disabled. Device Settings This feature displays the base I/O port address and the Interrupt Request address of Serial Port 1~5.
Change Port Settings This option specifies the base I/O port address and the Interrupt Request address of the Serial Port. Select Auto to let the BIOS automatically assign the base I/O and IRQ address. The options for Serial Port 1 are Auto , (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12). The options for Serial Port 2 are Auto , (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12). 7-21