Supermicro SuperServer 1019P-WTR — 6.3 Advanced Setup Configurations

Chapter 6: BIOS SuperServer 1019P-WTR User's Manual Power Button Function Intel Virtualization Technology This feature controls how the system shuts down when the power button is pressed. Select 4 Seconds Override for the user to power off the system after pressing and holding the power button for 4 seconds or longer. Select Instant Off to instantly power off the system as soon as the user presses the power button. The options are Instant Off and 4 Seconds Override . Use this feature to enable the Vanderpool Technology. This technology allows the system to run several operating systems simultaneously. The options are Disable and Enable .

PPIN Control Select Unlock/Enable to use the Protected-Processor Inventory Number (PPIN) in the system. The options are Unlock/Disable and Unlock/Enable Throttle on Power Fail Use this feature to decrease system power by throttling CPU frequency when one power supply has failed. The options are Disabled and Enabled. Hardware Prefetcher (Available when supported by the CPU) If set to Enable, the hardware prefetcher will prefetch streams of data and instructions from the main memory to the L2 cache to improve CPU performance. The options are Disable and Enable . CPU Configuration The following CPU information will display:

Processor BSP Revision Adjacent Cache Prefetch (Available when supported by the CPU) The CPU prefetches the cache line for 64 bytes if this feature is set to Disable. The CPU prefetches both cache lines for 128 bytes as comprised if this feature is set to Enable . Processor Socket Processor ID DCU Streamer Prefetcher (Available when supported by the CPU) Processor Frequency Select Enable to enable the DCU (Data Cache Unit) Streamer Prefetcher, which will stream and prefetch data and send it to the Level 1 data cache to improve data processing and system performance. The options are Disable and Enable .

Processor Max Ratio DCU IP Prefetcher (Available when supported by the CPU) Processor Min Ratio Select Enable to enable DCU (Data Cache Unit) IP Prefetcher support, which will prefetch IP addresses to improve network connectivity and system performance. The options are Enable and Disable. Microcode Revision L1 Cache RAM LLC Prefetch L2 Cache RAM If set to Enable, the hardware prefetcher will prefetch streams of data and instructions from the main memory to the L3 cache to improve CPU performance. The options are Disable and Enable.

L3 Cache RAM Processor 0 Version Extended APIC Hyper-Threading (ALL) (Available when supported by the CPU) Select Enable to activate APIC (Advanced Programmable Interrupt Controller) support. The options are Disable and Enable. Select Enable to support Intel Hyper-threading Technology to enhance CPU performance. The options are Disable and Enable . AES-NI Execute Disable Bit (Available if supported by the OS & the CPU) Select Enable to use the Intel Advanced Encryption Standard (AES) New Instructions (NI) to ensure data security. The options are Disable and Enable .

Select Enabled to enable the Execute-Disable Bit, which will allow the processor to designate areas in the system memory where an application code can execute and where it cannot, thus preventing a worm or a virus from flooding illegal codes to overwhelm the processor or damage the system during an attack. The default is Enable . (Refer to the Intel ® and Microsoft ® websites for more information.) 71 70