Supermicro SuperServer 1019S-M2 — 6.3 Advanced Setup Configurations

SuperServer 1019S-M2 User's Manual Chapter 6: BIOS Active Processor Cores Package Power Limit MSR Lock This feature determines how many CPU cores will be activated for each CPU. When all is selected, all cores in the CPU will be activated. (Please refer to Intel's website for more information.) The options are All and 1, 2, and 3. Select Enabled to lock the package power limit for the model specific registers. The options are Disabled and Enabled. Power Limit 1 Override Intel® Virtualization Technology Select Enabled to support average power limit (PL1) override. The default setting is Disabled .

Select Enable to use Intel Virtualization Technology so that I/O device assignments will be reported directly to the VMM (Virtual Memory Management) through the DMAR ACPI Tables. This feature offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with greater reliability, security and availability in networking and data-sharing. The settings are Enabled and Disabled. Power Limit 2 Override Select Enabled to support rapid power limit (PL2) override. The default setting is Enabled . Power Limit 2 Use this item to configure the value for Power Limit 2. The value is in milli watts and the step size is 125mW.

Use the number keys on your keyboard to enter the value. Enter 0 to use the manufacture default setting If the value is 0, the BIOS will set PL2 as 1.25* TDP. Hardware Prefetcher (Available when supported by the CPU) If set to Enabled, the hardware prefetcher will prefetch streams of data and instructions from the main memory to the L2 cache to improve CPU performance. The options are Disabled and Enabled . 1-Core Ratio Limit Override This increases (multiplies) 1 clock speed in the CPU core in relation to the bus speed when one CPU core is active. Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting.

Adjacent Cache Line Prefetch (Available when supported by the CPU) The CPU prefetches the cache line for 64 bytes if this feature is set to Disabled. The CPU prefetches both cache lines for 128 bytes as comprised if this feature is set to Enabled . 2-Core Ratio Limit Override CPU AES This increases (multiplies) 2 clock speeds in the CPU core in relation to the bus speed when two CPU cores are active. Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting. Select Enabled to enable Intel CPU Advanced Encryption Standard (AES) Instructions for CPU to enhance data integrity. The options are Enabled and Disabled.

Boot Performance Mode 3-Core Ratio Limit Override This feature allows the user to select the performance state that the BIOS will set before the operating system handoff. The options are Power Saving, Max Non-Turbo Performance and Turbo Performance. This increases (multiplies) 3 clock speeds in the CPU core in relation to the bus speed when three CPU cores are active. Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting. 4-Core Ratio Limit Override HardWare P-States (HWP) This increases (multiplies) 4 clock speeds in the CPU core in relation to the bus speed when three CPU cores are active.

Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting. Use this feature to enable or disable hardware P-States support. The options are Disabled and Enabled. Intel® SpeedStep™ CPU C-States Intel SpeedStep Technology allows the system to automatically adjust processor voltage and core frequency to reduce power consumption and heat dissipation. The options are Disabled and Enabled . Use this feature to enable the C-State of the CPU. The options are Disabled and Enabled . Enhanced C-States Turbo Mode Use this feature to enable the enhanced C-State of the CPU. The options are Disabled and Enabled .

Select Enabled for processor cores to run faster than the frequency specified by the manufacturer. The options are Disabled and Enabled . 67 66