Supermicro SuperServer 1019S-M2 — Front Features

SuperServer 1019S-M2 User's Manual Chapter 1: Introduction 1.4 Server Chassis Features Front Features The SC514-407C is a mini 1U chassis. See the illustration below for the features included on the front of the chassis. Control Panel The switches and LEDs located on the control panel are described below. See Chapter 4 for more details on the control panel. 2 1 1 7 6 5 4 3 2 3 3 Figure 1-2. Chassis Front View Figure 1-1.

Control Panel View 11 10 Front Chassis Features Item Feature Description 1 Control Panel Front control pa nel with LEDs and buttons (see preceding page) 2 Cooling Vent Vent for cool air intake 3 Rack Ear Brackets Attaches server chassis to the rack Control Panel Features Item Feature Description 1 Information LED See table below 2 NIC2 LED Indicates network activity on LAN port 2 when flashing 3 NIC1 LED Indicates network activity on LAN port 1 when flashing 4 HDD LED Indicates activity on the hard drive when flashing. 5 Power LED Indicates power is being supplied to the system power supply. This LED should normally be illuminated when the system is operating.

6 Reset Button The reset button is used to reboot the system 7 Power Button The main power button is used to apply or remove power from the power supply to the server. Turning off system power with this button removes the main power but maintains standby power. To perform many maintenance tasks, you must also unplug system before servicing Information LED Status Description Continuously on and red An overheat condition has occured. (This may be caused by cable congestion.) Blinking red (1Hz) Fan failure, check for an inoperative fan. Solid blue Local UID has been activated. Use this function to locate the server in a rackmount environment. Blinking blue Remote UID is on.

Use this function to identify the server from a remote location.