Supermicro SuperServer 1019S-MP — Supermicro SuperServer 1019S-MP User's Manual PDF Download

Chapter 3 Motherboard Connections Ethernet Ports Four Gigabit Ethernet ports (LAN1-4) and an IPMI LAN port are located on the I/O back panel to provide network connections. These ports accept RJ45 type cables. Universal Serial Bus (USB) Ports Four USB 3.0 ports (USB1-4) are located on the I/O back panel. The motherboard also provides four USB 2.0 connections via USB headers (USB5/6 and USB7/8). The USB9 header is USB Type A. The onboard headers can be used to provide front side USB access with a cable (not included). VGA Port The VGA controller is from AST2400 mainly for BMC KVM (Keyboard, Video and Mouse) remote control purpose.

Unit Identifier Switch UID Indicators provide easy identification of a system that may be in need of service. The UID switch is located next to the VGA port on the back panel. The rear UID LED (LED7) is located next to the UID Switch; the front UID LED is on the control panel. When you press the UID switch, both rear UID LED and front panel UID LED Indicators are toggled on or off. UID can also be triggered using IPMI. DP DisplayPort, develped by the VESA consortium, delivers digital display and fast refresh rate. It can connect to virtually any display device using a DisplayPort adapter for devices such as VGA, DVI or HDMI.

HDMI Port The HDMI (High-Definition Multimedia Interface) port is used to display both high definition video and digital sound through an HDMI-capable display, using the same (HDMI) cable. DVI-I Port One DVI-I port (Digital Visual Interface) is located next to the LAN ports on the I/O back panel. This port provides both an analog and digital displays from the CPU graphics. 33