Supermicro SuperServer 1019S-MP — Supermicro SuperServer 1019S-MP User's Manual PDF Download

Chapter 5 BIOS Max TOLUD This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable DRAM" memory space to be used by internal graphics devices, GTT Stolen Memory, and TSEG, respectively, if these devices are enabled. The options are Dynamic , 1 GB, 1.25 GB, 1.5 GB, 1.75 GB, 2 GB, 2.25 GB, 2.5 GB, 2.75 GB, 3 GB, 3.25 GB, and 3.5 GB. Energy Performance Gain Use this feature to enable or disable the energy performance gain. The options are Disabled and Enabled. Memory Scrambler Select Enabled to enable memory scrambler support. The options are Disabled and Enabled . Fast Boot Use this feature to enable or disable fast path through the memory reference code.

The options are Enabled and Disabled. REFRESH_2X_MODE Use this feature to select the refresh mode. The options are Disabled , 1- Enabled for WARM or HOT, and 2- Enabled HOT only. PCH-IO Configuration The following PCH-IO information will be displayed: Intel PCH RC Version Intel PCH SKU Name Intel PCH Rev ID Port 61h Bit-4 Emulation Select Enabled to enable the emulation of Port 61h bit-4 toggling in SMM (System Management Mode). The options are Disabled and Enabled . PCIe PLL SSC Enable this feature to reduce EMI interference by down spreading clock 0.5%. Disable this feature to centralize the clock without spreading. The options are Disabled and Enabled.

SATA Configuration When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA devices that are supported by the Intel PCH chip and displays the following items: 53