S UPER S ERVER 1027B-MTF Manual 2-4 Installing the System into a Rack This section provides information on installing the SuperServer 1027B-MTF into a rack. If the 1027B-MTF has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. Note: The rails will fi t a rack between 26" and 33.5" deep. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. The following is a guideline for installing the 1027B- MTF into a rack with the rack rails provided. You should also refer to the installation instructions that came with the rack unit you are using.
Identifying the Sections of the Rack Rails Each assembly consists of two sections: an inner fi xed chassis rail that secures directly to the server chassis and an outer fi xed rack rail that secures directly to the rack itself. Figure 2-1. Identifying the Sections of the Rack Rails Inner Rail Extensions Inner Rails 2-4