Supermicro SuperServer 1027B-MTF — Supermicro SuperServer 1027B-MTF User's Manual PDF (1U Rackmount Server)

S UPER S ERVER 1027B-MTF User's Manual Connector Description Slot1 PCI 133 MHz Slot Notes: PCI slots are enabled with installed processors. If only a single CPU is installed, some PCI slots will not be enabled. See table above to determine which PCI slots are controlled by which CPU. SAS components are not included on the X9DBL-iF. 5-12 COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header FAN1~5, FANA CPU/System Fan Headers I-SATA 0~5 Intel PCH SATA Connectors 0~5 JD1 Power LED/Speaker (PWR LED Pins 1~3, Speaker:

Pins 4~7) JF1 Control Panel Header JIPMB1 4-pin External BMC I2C Header (for an IPMI Card) JL1 Chassis Intrusion JOH1 Overheat/Fan Fail LED JPI2C1 Power Supply SMBbus I2C Header JPW1 ATX 24-Pin Power Connector JPW2~JPW3 12V 8-Pin Power Connectors JSTBY1 Standby Power Header JTPM1 TPM (Trusted Platform Module)/Port 80 LAN1/2 Gb Ethernet Ports 1/2 (IPMI) LAN Dedicated IPMI LAN Port Slot3/4/5 (CPU2) PCI-Exp. 3.0 x8 Slots Slot2 (CPU1) PCI-Exp. 3.0 x4 in x8 Slot Slot6 (CPU1) PCI-Exp.

3.0 x4 in x16 Slot SCU-SGPIO1/2 Serial Link General Purpose I/O Header 1 for SCU-SATA T-SGPIO 1 Serial Link General Purpose I/O Header 1 for I-SATA 0~5 T-SGPIO 2 Serial Link General Purpose I/O Header 1 for I-SATA 4/5 TPM/Port 80 TPM (Trusted Platform Module)/Port 80 Connection (JTPM) USB 0/1 Back Panel USB 0/1 Ports USB 2/3, 4/5 Front Panel Accessible USB 2/3, 4/5 Connections USB 6 Front Panel Type A USB 6 Port UID Switch UID (Unit Identifi er) Switch