Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 1028TR-T/TF. Installation and maintainance should be performed by experienced technicians only. The SuperServer 1028TR-T/TF is a high-end server based on the SC809TS-1K03BP 1U rackmount chassis and the dual processor X10DRT-L/LIBF serverboard. All models have an IPMI LAN port and two serverboard nodes with four hot-swap 2.5" SATA3 Hard Disk Drives (HDD) each per node.
Each of the various models of the SuperServer 1028TR-T/TF servers and their associated serverboards for each of their unique options are listed in the table below: Manual Organization Chapter 1: Introduction The fi rst chapter provides a checklist of the main components included with the server system and describes the main features of the X10DRT-L/LIBF serverboard and the SC809TS-1K03BP chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the SuperServer 1028TR-T/TF into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3: System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. iii SUPERSERVER 1028TR-T/TF Model Variations Server Model X10DRT Serverboard Infi niBand FDR/QDR Connector 1028TR-T X10DRT-L NO 1028TR-TF X10DRT-LIBF YES