Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF — Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF User Manual PDF

SUPERSERVER 2026TT-DLRF/DLIBXRF/DLIBQRF User's Manual 1-2 Serverboard Features The 2026TT-DLRF/DLIBXRF/DLIBQRF includes two X8DTT series dual processor serverboards (see list on previous page), which are based on Intel's 5520 + ICH10R chipset. Below are the main features of the serverboards. Note that the features on each board are doubled for the server, which includes two nodes. Processors Each X8DTT series serverboard supports two Intel® 5600/5500 series processors in LGA1366 sockets. Please refer to our web site for a complete listing of supported processors (www.supermicro.com).

Memory Each X8DTT has twelve DIMM sockets that can support up to 192 GB of regis- tered ECC DDR3-1333/1066/800 SDRAM or 48 GB of unbuffered ECC/Non-ECC 1333/1066/800 MHz memory for a maximum of 768 GB for the system. See Chapter 5 Section 6 for more details on installing memory into the system. SAS An LSI 2008 SAS daughter card may be included with the system to provide support for six SAS drives per node. The hot-swap SAS drives are connected to a backplane that provides power, bus termination and confi guration settings. SATA SATA may be supported with a SATA daughter card (instead of a SAS daughter card) for six Gb/s SATA drives.

The hot-swappable SATA drives are connected to a backplane that provides power, bus termination and confi guration settings. PCI Expansion Slots Each X8DTT-HEF+/X8DTT-HIBXF+/X8DTT-HIBQF+ has included riser cards that allow it to support two full-sized PCI Express 2.0 x8 expansion cards (in x16 slots), or four total for the server. Ethernet Ports An Intel® network controller is integrated into each of the serverboards to support two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output). 1-2