Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF — Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF User Manual PDF

Chapter 2: Server Installation 2-4 Rack Mounting Instructions This section provides information on installing the SC217 chassis into a rack unit with the quick-release rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using. Note: This rail will fi t a rack between 26" and 33.5" deep. Separating the Sections of the Rack Rails The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of two sections:

an inner fi xed chassis rail that secures directly to the server chassis and an outer fi xed rack rail that secures directly to the rack itself. Figure 2-2. Separating the Rack Rails 1 1 Rail Assembly Separating the Inner and Outer Rails Locate the rail assembly in the chassis 1. packaging. Extending the Rails 1 2 Extend the rail assembly by pulling it 2. outward. 1 3 Quick- Release Tab Press the quick-release tab. 3. Separate the inner rail extension from 4. the outer rail assembly. 1 4 Separating the Inner Rail Extension 2-5