Chapter 5: Advanced Serverboard Setup Due to the memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional. Refer to the table below. 5-5 Adding PCI Expansion Cards PCI Express Slot The 2026TT-DLRF/DLIBXRF/DLIBQRF includes two preinstalled riser cards de- signed specifi cally for use in the SC217HD-R1400BP 2U rackmount chassis (one riser card for each node). These riser cards each support two PCI Express x8 expansion cards to fi t inside the chassis. PCI Expansion Card Installation A riser card has already been preinstalled into each serverboard.
Perform the fol- lowing steps to add a PCI expansion card: Remove the PCI slot shield on the chassis by releasing the locking tab. 1. Insert the expansion card into the riser card. 2. Secure the expansion card with the locking tab. 3.
5-9 Possible System Memory Allocation & Availability System Device Size Physical Memory Remaining (Available) (3 GB Total System Memory) Physical Memory Remaining (Available) (4 GB Total System Memory) Firmware Hub fl ash memory (System BIOS) 1 MB 3.00 3.99 Local APIC 4 KB 3.00 3.99 Area Reserved for the chipset 2 MB 3.00 3.99 I/O APIC (4 Kbytes) 4 KB 3.00 3.99 PCI Enumeration Area 1 256 MB 3.00 3.76 PCI Express (256 MB) 256 MB 3.00 3.51 PCI Enumeration Area 2 (if needed) -Aligned on 256- MB boundary- 512 MB 3.00 3.01 VGA Memory 16 MB 2.85 2.85 TSEG 1 MB 2.84 2.84 Memory available to OS & other applications 2.84 2.84