Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF — Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF User Manual PDF

SUPERSERVER 2026TT-DLRF/DLIBXRF/DLIBQRF User's Manual Normally, the only visible Power-On Self-Test (POST) routine is the memory test. As the memory is being tested, press the key to enter the main menu of the AMI BIOS Setup Utility. From the main menu, you can access the other setup screens. An AMI BIOS identifi cation string is displayed at the left bottom corner of the screen below the copyright message. Starting the Setup Utility Warning! Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.

In no event shall Supermicro be liable for direct, indirect, special, incidental, or consequential damages arising from a BIOS update. If you have to update the BIOS, do not shut down or reset the system while the BIOS is updating. This is to avoid possible boot failure. 7-2 Main Setup When you fi rst enter the AMI BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS Setup screen is shown below. System Overview The following BIOS information will be displayed: System Time/System Date Use this option to change the system time and date.

Highlight System Time or Sys- tem Date using the arrow keys. Enter new values through the keyboard. Press the key or the arrow keys to move between fi elds. The date must be entered in 7-2