Chapter 7: BIOS Throttling - Closed Loop/Throttling - Open Loop Throttling improves reliability and reduces power in the processor by automatic voltage control during processor idle states. Available options are Disabled and Enabled. If Enabled, the following items will appear: Hysteresis Temperature Temperature Hysteresis is the temperature lag (in degrees Celsius) after the set DIMM temperature threshold is reached before Closed Loop Throttling begins. The options are Disabled, 1.5 o C , 3.0 o C, and 6.0 o C. Guardband Temperature This is the temperature which applies to the DIMM temperature threshold. Each step is in 0.5 o C increment. The default is [006] .
Press "+" or "-" on your keyboard to change this value. This is the temperature detected at the chassis inlet. Each step is in 0.5 o C increment. The default is [070] . Press "+" or "-" on your keyboard to change this value. Inlet Temperature Temperature Rise This is the temperature rise to the DIMM thermal zone. Each step is in 0.5 o C increment. The default is [020] . Press "+" or "-" on your keyboard to change this value. Air Flow This is the air fl ow speed to the DIMM modules. Each step is one mm/ sec. The default is [1500] . Press "+" or "-" on your keyboard to change this value. Altitude This feature defi nes how many meters above or below sea level the system is located.
The options are Sea Level or Below, 1~300, 301~600, 601~900, 901~1200, 1201~1500, 1501~1800, 1801~2100, 2101~2400, 2401~2700, 2701~3000. DIMM Pitch This is the physical space between each DIMM module. Each step is in 1/1000 of an inch. The default is [400] . Press "+" or "-" on your keyboard to change this value. 7-9