Chapter 7: BIOS X DMI Event Log View Event Log Use this option to view the System Event Log. Mark all events as read This option marks all events as read. The options are OK and Cancel. Clear event log This option clears the Event Log memory of all messages. The options are OK and Cancel. 7-4 Security Settings The AMI BIOS provides a Supervisor and a User password. If you use both pass- words, the Supervisor password must be set fi rst. Supervisor Password This item indicates if a Supervisor password has been entered for the system. "Not Installed" means a Supervisor password has not been used. User Password This item indicates if a user password has been entered for the system.
"Not In- stalled" means that a user password has not been used. Change Supervisor Password Select this feature and press to access the submenu, and then type in a new Supervisor Password. User Access Level (Available when Supervisor Password is set as above) Available options are Full Access : grants full User read and write access to the Setup Utility, View Only: allows access to the Setup Utility but the fi elds cannot be changed, Limited: allows only limited fi elds to be changed such as Date and Time, No Access: prevents User access to the Setup Utility. Change User Password Select this feature and press to access the submenu , and then type in a new User Password.
Clear User Password (Available only when User Password has been set) This item allows you to clear a user password after it has been entered. 7-23