SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual Memory Confi guration Enforce POR Select Enabled to enforce POR restrictions on DDR4 frequency and voltage programming. The options are Enabled and Disabled. Use this feature to set the maximum memory frequency for onboard memory modules. The options are Auto , 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400, 2600, 2667, and Reserved (Do not select Reserved). Memory Frequency ECC Support Select Enable to enable Error Checking & Correction (ECC) support for onboard memory modules. The options are Auto , Enable and Disable. Data Scrambling Select Enabled to enable data scrambling to enhance system performance and data integrity.
The options are Auto , Disabled and Enabled. DRAM RAPL (Running Average Power Limit) Baseline Use this feature to set the run-time power-limit baseline for DRAM modules. The options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1 . Set Throttling Mode Throttling improves reliability and reduces power consumption in the processor via automatic voltage control during processor idle states. The options are Disabled and CLTT (Closed Loop Thermal Throttling). Socket Interleave Below 4GB Select Enable for the memory above the 4G Address space to be split between two sockets. The options are Enable and Disable . Channel Interleaving Use this item to set DIMM channel interleaving mood.
The options are Auto , 1-Way Interleave, 2-Way Interleave, 3-Way Interleave, and 4-Way Interleave. Rank Interleaving Use this item to select a rank memory interleaving method. The options are Auto , 1-Way, 2-Way, 4-Way, and 8-Way. 7-14