SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual SATA Confi guration When this submenu is selected, AMI BIOS automatically detects the presence of the SATA devices that are supported by the Intel PCH chip and displays the following items: SATA Controller This item enables or disables the onboard SATA controller supported by the Intel PCH chip. The options are Enabled and Disabled. Confi gure SATA as Select IDE to confi gure a SATA drive specifi ed by the user as an IDE drive. Select AHCI to confi gure a SATA drive specifi ed by the user as an AHCI drive. Select RAID to confi gure a SATA drive specifi ed by the user as a RAID drive. The options are IDE, AHCI , and RAID.
*If the item above "Confi gure SATA as" is set to AHCI, the following items will display : Support Aggressive Link Power Management When this item is set to Enabled, the SATA AHCI controller manages the power usage of the SATA link. The controller will put the link to a low power state when the I/O is inactive for an extended period of time, and the power state will return to normal when the I/O becomes active. The options are Enabled and Disabled. SATA Port 0~ Port 5 This item displays the information detected on the installed SATA drive on the particular SATA port.
Model number of drive and capacity Software Preserve Support Port 0~ Port 5 Select Enabled to enable a SATA port specifi ed by the user. The options are Disabled and Enabled. Port 0 ~ Port 5 Hot Plug Select Enabled to enable hot-plugging support for a port specifi ed by the user, which will allow the user to replace a SATA disk drive installed on this port without shutting down the system. The options are Enabled and Disabled. Port 0 ~ Port 5 Spin Up Device On an edge detect from 0 to 1, set this item to allow the PCH to initialize the device. The options are Enabled and Disabled . 7-18