SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual SR-IOV (Available if the system supports Single-Root Virtualization) Select Enabled for Single-Root IO Virtualization support. The options are Enabled and Disabled. Maximum Payload Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E device to enhance system performance. The options are Auto , 128 Bytes, and 256 Bytes. Maximum Read Request Select Auto for the system BIOS to automatically set the maximum size for a read request for a PCI-E device to enhance system performance. The options are Auto , 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
ASPM Support Use this item to set the Active State Power Management (ASPM) level for a PCI-E device. Select Auto for the system BIOS to automatically set the ASPM level based on the system confi guration. Select Disabled to disable ASPM support. The options are Disabled , and Auto. Warning : Enabling ASPM support may cause some PCI-E devices to fail! MMIOHBase Use this item to select the I/O base memory size according to memory-address mapping for the PCH chip. The base memory size must be between 4032G to 4078G. The options are 56T , 48T, 24T, 512G, and 256G. MMIO High Size Use this item to select the high I/O memory size according to memory-address mapping for the PCH chip.
The options are 256G , 128G, 512G, and 1024G. PCI/PCIX/PCIe Slot 1 OPROM/PCI/PCIX/PCIe Slot 2 OPROM/PCI/PCIX/PCIe Slot 3 OPROM/PCI/PCIX/PCIe Slot 4 OPROM/ Select Enabled to enable Option ROM support to boot the computer using a device installed on the slot specifi ed by the user. The options are Disabled, Legacy and EFI. Onboard LAN Option ROM Type Select Enabled to enable Option ROM support to boot the computer using a device installed on the slot specifi ed by the user. The options are Legacy and EFI. 7-24