SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual When SEL is Full This feature allows the user to determine what the AMI BIOS should do when the system event log is full. Select Erase Immediately to erase all events in the log when the system event log is full. The options are Do Nothing and Erase Immediately. Note : After making changes on a setting, be sure to reboot the system for the changes to take effect. BMC Network Confi guration The following items will be displayed: IPMI LAN Selection IPMI Network Link Status Update IPMI LAN Confi guration Select Yes for the system BIOS to automatically reset the following IPMI settings at next system boot. The options are Yes and No .
Confi guration Address Source (Available when the item above - Update IPMI LAN Confi guration is set to Yes) Use this item to select the IP address source for this computer. If Static is selected, you will need to know the IP address of this computer and enter it to the system manually in the fi eld. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Confi guration Protocol) server attached to the network and request the next available IP address for this computer. The options are DHCP and Static. Station IP Address This item displays the Station IP address for this computer. This should be in decimal and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask This item displays the sub-network that this computer belongs to. The value of each three-digit number is separated by dots and it should not exceed 255. Station MAC Address This item displays the Station MAC address for this computer. Mac addresses are 6 two-digit hexadecimal numbers. Gateway IP Address This item displays the Gateway IP address for this computer. This should be in decimal and in dotted quad form (i.e., 192.168.10.253). 7-36