Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

Chapter 2: Server Installation To install the inner rails, use the procedure below. Installing The Inner Rails on the Chassis Installing the Inner Rails (Figures 2-3 and 2-4) 1. Confi rm that the left and right inner rails have been correctly identifi ed. 2. Place the inner rail fi rmly against the side of the chassis, aligning the hooks on the side of the chassis with the holes in the inner rail. 3. Slide the inner rail forward toward the front of the chassis until the rail clicks into the locked position, which secures the inner rail to the chassis. 4. Secure the inner rail to the chassis with the screws provided. 5. Repeat steps 1 through 4 above for the other inner rail. Figure 2-3.

Installing the Inner Rails Inner Rails 1 4 1 2 1 3 Figure 2-4: Inner Rails Installed on the Chassis 2-7