Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 2028TP-DECR/DECTR/DECFR. Installation and maintainance should be performed by experienced technicians only. The SuperServer 2028TP-DECR/DECTR/DECFR is a high-end server based on the SC217HD+-R1K28B 2U rackmount chassis and the X10DRT-P/PIBF/PT dual processor serverboards with two BPN-ADP-E1C-L-O-P controller cards for SAS/ SATA drives. All models have an IPMI LAN port and two serverboard nodes, each with twelve hot-swap Hard Disk Drives (HDD) each per node.

Each of the various models of the SuperServer 2028TP-DECR/DECTR/DECFR servers and their associated serverboards for each of their unique options are listed in the table below: Manual Organization Chapter 1: Introduction The fi rst chapter provides a checklist of the main components included with the server system and describes the main features of the X10DRT-P/PIBF/PT serverboard and the SC217HD+-R1K28B chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the SuperServer 2028TP-DECR/DECTR/DECFR into a rack and check out the server confi guration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. iii SuperServer 2028TP-DECR/DECTR/DECFR Model Variations Server Model X9DRT Serverboard Infi niBand 10G Ethernet 2028TP-DECR X10DRT-P 2028TP-DECFR X10DRT-PIBF YES 2028TP-DECTR X10DRT-PT YES