Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

Chapter 5: Advanced Serverboard Setup 3. With the second lever fully retracted, gently push down on the "Open 1st" lever to loosen the load plate. Lift the load plate with your fi ngers to open it completely. Open the load plate. 4. Pop the plastic cap marked "Warning" out of the load plate. IMPORTANT! 5. Holding the CPU carefully above the socket, orient the CPU so that all keys and edges will fi t the socket. OPEN 1st OPEN 1st 6. Carefully lower the CPU straight down into the socket. Do not move the CPU horizontally, and do not rub the pins of the socket. This may damage the CPU or the socket. Caution: You can only install the CPU into the socket in one direction.

Make sure that the CPU is properly inserted into the socket before closing the load plate. If it does not close properly, do not force it as it may damage your CPU. Instead, open the load plate again and double-check that the CPU is aligned properly. 5-5